NOAA Windows

Zuerst WxtoImg runterladen

USB Dongle installieren und anstecken

Download Treiber für Windows:

Download Radio Software:

Open SDRSharp select the audio piping method you are using under the Audio Output drop down box and then tune to the frequency that the satellite will be broadcasting at. Adjust the gain settings in SDRSharp under the Configure button so that you get good reception of the signal. Set the receive mode to WFM, filter bandwidth to 34 kHz and Filter Audio set to OFF. It may also be useful to ensure Snap to Grid is unchecked.

Adjust the volume in SDRSharp and/or Windows volume settings so that the volume bar in the bottom right hand corner of WXtoImg shows a green color.


Antenne bauen: